SPONSORED LINKS

2004 Chevrolet Trailblazer No brake lights

Tiny
JEREMY6206
  • MEMBER
  • 2004 CHEVROLET TRAILBLAZER
  • 4.2L
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 195,000 MILES
Iv checked all the fuses found there is no power going to the fuse under the rear seat a 10 amp fuse for the brakes not sure what to look for before this to see why power isnt getting to the brake fuse.
Im sure the cruise control isnt working becaus of the brake lights I allready changed the brake switch under the dash on the brake peddle
And now the abs and parking brake light is on I check the ignition switch and its still good checked the brake fluid level and its good what else can it be
SPONSORED LINKS
Sunday, February 1st, 2015 AT 6:27 PM

6 Replies

Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
ARE U SURE EVERYTHING IS HOOKED BACK UP AT THE PEDAL SWITCH AND U INSTALLED THE CORRECT BRAKE LIGHT SWITCH. TRY SETTING AND RELEASING THE E BRAKE TO SEE IF IT GOES OUT. LOOK IN THE OWNER MANUAL FOR THE UNDER HOOD FUSE PANEL IT HAS LARGER FUSES THAT FEED THE SMALLER ONES UNDER THE SEAT. USE A TEST LIGHT WHEN CHECKING VOLTAGES.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Sunday, February 1st, 2015 AT 11:12 PM
Tiny
JEREMY6206
  • MEMBER
  • 3 POSTS
Done done and done im going to look at a grounding wire when it gets done raining but she might haft to go to a shop
Was this
answer
helpful?
Yes
No
Monday, February 2nd, 2015 AT 10:18 AM
Tiny
JEREMY6206
  • MEMBER
  • 3 POSTS
Where does number 51 connect in the raer fuse box connect to to get its power for the brakes there is a 10 amp fuse there but no power is going to it press on the brake still no power to it.
Was this
answer
helpful?
Yes
No
Monday, February 2nd, 2015 AT 11:22 AM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
U need to find out y u have no power to that fuse and also ck. The turn signal switch because the brake lights go through the switch to the bulbs. Ck. The voltage through the switch.
Was this
answer
helpful?
Yes
No
Monday, February 2nd, 2015 AT 11:52 AM
Tiny
JEREMY6206
  • MEMBER
  • 3 POSTS
Found out its the switch boards in the tail loght assembly ordering 2 ok now the abs light and emergency parking brake light is on its not the wireing or a fuse what could it be
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, February 2nd, 2015 AT 2:48 PM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
CODE SET
U NEED TO GO GET THE CODES CHECKED THEIR IS A ABS CODE SET.
Was this
answer
helpful?
Yes
No
Monday, February 2nd, 2015 AT 3:41 PM

Please login or register to post a reply.

Related Brake Light Not Working Content

VIEW MORE

Sponsored links