Oil/tacho gauge fault

Tiny
LUKE89
  • MEMBER
  • 2003 TOYOTA LANDCRUISER
  • 6 CYL
  • 4WD
  • MANUAL
  • 240,000 MILES
I have a 2003 100 series standard diesel land cruiser. Recently the tacho and oil pressure gauges have been intermitently dropping in and out whilst the other instruments remain fully functional. Would appreciate any info/advice as I am trying to sell the vehicle.
Do you
have the same problem?
Yes
No
Thursday, August 11th, 2011 AT 10:58 AM

6 Replies

Tiny
LUKE89
  • MEMBER
  • 2 POSTS
Also the vehicle has been at an auto sparky for three weeks who had NO IDEA what the issue is.
Was this
answer
helpful?
Yes
No
+1
Thursday, August 11th, 2011 AT 10:59 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Such problem are most likely due to a bad connection at the meter cluster. It could be a bad soldered joint. You need to remove the meter cluster to have a closer look and repair if necessary.
Was this
answer
helpful?
Yes
No
+1
Thursday, August 11th, 2011 AT 12:52 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
It is not a mechanical fault so not easy to detect, furthermore being intermittent.

Get someone who is good with electricals to have a look at the meter cluster.
Was this
answer
helpful?
Yes
No
-3
Friday, August 12th, 2011 AT 12:15 AM
Tiny
TIMOTHY WRAY
  • MEMBER
  • 2 POSTS
I have the same problem as Luke89 in my 2005 100 series cruiser, did you sort it out Luke89
Was this
answer
helpful?
Yes
No
Friday, January 26th, 2018 AT 1:00 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
I had one of these with a similar problem a while ago, it was a cracked circuit board in the cluster, may be worth having a look at this.
Was this
answer
helpful?
Yes
No
Friday, January 26th, 2018 AT 8:45 PM

Please login or register to post a reply.

Sponsored links