SPONSORED LINKS

2003 Saturn Vue engine stopping after 20 min

Tiny
PAULOVUE
  • MEMBER
  • 2003 SATURN VUE
  • 3.0L
  • V6
  • AWD
  • AUTOMATIC
  • 175,000 MILES
Recently the engine stop, after of 1 hour the car runs again, I used the scanner and it showed me the following code p0335 crankshaft sensor, I changed the sensor and the problem stills. The car work fine for 20 minutes and then it stops. I have to wait for 1 hour and the to the car runs again. I appreciated your help and a fast answer.
SPONSORED LINKS
Friday, August 21st, 2015 AT 9:59 AM

5 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
With the code and the symptoms your describing a bad crankshaft position sensor. The sensor you replaced was it right by the oil filter with a long wire coming off of it that went up and plugged in by the intake manifold? Also does your code reader show live data rpms etc?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, August 21st, 2015 AT 12:32 PM
Tiny
PAULOVUE
  • MEMBER
  • 3 POSTS
This is a picture of the sensor I changed, and I checked the cable of the other and it looks like is connected properly, the problem stills. Checking the 3000 rpm the car feels like the injection system doesn't work.
Was this
answer
helpful?
Yes
No
Saturday, August 22nd, 2015 AT 6:45 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
The picture you posted I cant open whats the part number of the new part?Also do you have a code reader that can read live data as far as rpms? I would like to see when it doesn't start if there is a rpm reading?
Was this
answer
helpful?
Yes
No
Saturday, August 22nd, 2015 AT 5:17 PM
Tiny
PAULOVUE
  • MEMBER
  • 3 POSTS
I can't read the rpm with scanner the new sensor. Is airtex 5S1247 The old one is botch 1GP6002 but in the website. The airtex say is compatible whit. Saturn 2003 V6 3.0 l
Was this
answer
helpful?
Yes
No
Monday, August 31st, 2015 AT 5:07 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
That part number in the air tex wells part is the cam sensor so thats one problem. The airtex wells crankshaft position sensor part number is 5s1921
where is the sensor located you replaced?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Monday, August 31st, 2015 AT 6:39 AM

Please login or register to post a reply.

Related Engine Stall While Driving Content

Is it Safe to Drive Check Engine Light?
VIDEO
Is it Safe to Drive Check Engine Light?
Instructional repair video
Engine Stalls While Driving
GUIDE
Engine Stalls While Driving
An engine that stalls while driving and then starts back up again, either immediately or after a short time is different from an engine that just wont start or if the...
VIEW MORE

Sponsored links