SPONSORED LINKS

OEM cruise control don't work

Tiny
TONYD
  • MEMBER
  • 2003 MAZDA B2300
  • 12,300 MILES
Replaced steering wheel mounted switches with used switches. Fuse is ok. Checked switch on brake pedal, the brake light works. It appears that the clutch pedal switch works also. The truck is in good condition. Just had the recall performed on the cruise control also, but the mechanic would not tell me much about what he knew of the cruise control-maybe he did'nt know!

thanks,

Tony
SPONSORED LINKS
Friday, March 2nd, 2012 AT 1:44 AM

2 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Why did you replace the wheel mounted switches? Were they bad?

What recall was performed?

Roy
Was this
answer
helpful?
Yes
No
Friday, March 2nd, 2012 AT 4:12 AM
Tiny
TONYD
  • MEMBER
  • 2 POSTS
I replaced the wheel mounted switches because I could not hear or feel the click of the switch. Ford & Mazda had a recall and added a jumper wire with a fuse in it to the brake switch mounted on the front of the master cyclinder.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, March 5th, 2012 AT 1:11 AM

Please login or register to post a reply.

Sponsored links