Serpentine belt tensioner

Tiny
FRANCESCO MARINO
  • MEMBER
  • 2003 HONDA PILOT
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 80,000 MILES
How do you replace a serpentine belt tensioner on a 2003 honda pilot? The pulley has rubber residue where it should be shiny, but it looks like it rolls fairly sooth.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Wednesday, January 26th, 2011 AT 12:54 PM

1 Reply

Tiny
KHLOW2008
  • EXPERT
On this model Honda there is no bolt to release the tension and there are 3 bolts 2x10mm 1x8mm

this guide will help

https://www.2carpros.com/diagrams/honda/pilot/2003

The tensioner can then be removed by taking out the 2 holding bolts.

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Cheers
Image (Click to enlarge)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+2
Wednesday, January 26th, 2011 AT 6:54 PM

Please login or register to post a reply.

Related Serpentine Belt Tensioner Replace/Remove Content

Serpentine Belt Tensioner Replacement
GUIDE
Serpentine Belt Tensioner Replacement
There are many configurations of serpentine belt tensioners, but all follow the same principle which is to keep constant pressure or tension on the engine's serpentine belt...

Sponsored links