2003 Chrysler Town and Country limp in mode

Tiny
KHILLIER246
  • MEMBER
  • 2003 CHRYSLER TOWN AND COUNTRY
  • 3.8L
  • V6
  • 2WD
  • AUTOMATIC
  • 195,000 MILES
I am getting a 700 & 760 codes with my OBDII scanner. I tested the solenoid pack and got 0-1 ohm replaced it & that one had a 2.5 ohm reading. Erased the code when done & it came right back. I do not like to throw money at it. Fluid looks great. This is a question you answered 1000x I could replace both input output sensors but if I put a used tcm will it have to flashed. I was let go from my job of 26 years because of my health so dollars is issue. Any help would be great
Do you
have the same problem?
Yes
No
Wednesday, April 15th, 2015 AT 8:38 AM

1 Reply

Tiny
HMAC300
  • EXPERT
Code 700 may be related to 760 see pic for causes.
Was this
answer
helpful?
Yes
No
Wednesday, April 15th, 2015 AT 12:58 PM

Please login or register to post a reply.

Recommended Guides