2003 Chevrolet S-10 antii lock brakes

Tiny
TALL PAUL UC
  • MEMBER
  • 2003 CHEVROLET S-10
  • 3.4L
  • V6
  • 4WD
  • AUTOMATIC
  • 120 MILES
03 chev s-10 PICK UP 4 WHEEL DRIVE EX. REPLACED BALL JOINTS RIVETED. HAD TO REMOVE ALL BRAKES ROTORS ETC. CHECK ENGINE LIGHT COME ON WITH ANTI LOCK CODE. HAD TO REPLACE ONE ANTI LOCK SENSOR. LIGHT WENT OUTAFTER RUN AWHILE. WHEN LIGHT WENT OUT THE BRAKES STARTED MAKEING NOISE AND PEDAL JUMPS WHEN YOU BRAKE AT LOW SPEED. WITH LIGHT ON BRAKES ARE NORMAL. LIGHT OFF JUMMP AND MAKES NOISE? EVERYTHING SEEM PUT TOGETHER RIGHT.
Do you
have the same problem?
Yes
No
Saturday, May 10th, 2014 AT 12:00 PM

4 Replies

Tiny
HMAC300
  • EXPERT
Have a pro scan for codes for abs to see what is wrong with system. When light is on abs doesn't work so it's an abs problem autoparts cant scan for these codes. System may need bleeding or you may have a valve in unit stuck
Was this
answer
helpful?
Yes
No
Saturday, May 10th, 2014 AT 1:41 PM
Tiny
TALL PAUL UC
  • MEMBER
Hmac300 tore hub back down, and left hub bearing on 03 s10 is making a lot of noise.I think I had that problem on another vehicle, giveing the bump and grind at low speed and anti locks acting up. Think so? T p
Was this
answer
helpful?
Yes
No
Monday, May 12th, 2014 AT 9:00 AM
Tiny
HMAC300
  • EXPERT
If yur bearing is bad it will screw up your absreplace it if it's making noise where you can hear it.
Was this
answer
helpful?
Yes
No
Monday, May 12th, 2014 AT 9:28 AM
Tiny
TALL PAUL UC
  • MEMBER
Hmsc300, yeah igot it ordered already. Just wonted to se if you thought so. Really couldn't hear it on vehicle, but turn by hand it makes noise and locks up. Thanks
Was this
answer
helpful?
Yes
No
Monday, May 12th, 2014 AT 9:42 AM

Please login or register to post a reply.

Sponsored links