Hey whats up changing booster is a 15min job, no need to remove brake hyd lines from master cyl & abs unit, just remove nuts holding master cyl & abs unit & move both forward slightly, then remove the booster push rod clip same place from under hood not from inside vehicle, after that remove both upper nuts for booster & u will need to go from under vehicle with a extension & 13mm socket to reach lower bolts, after that just take booster forward & up then out, refitting is reverse, made sure to fit push rod clip to rod before fitting booster in place after fitting all, just press brake pedal till u hear a click sound to lock push rods together. Good luck.
Friday, September 30th, 2011 AT 2:35 PM
