SPONSORED LINKS

2002 Ford Windstar harmonic balancer pulley

Tiny
JIMMYE1225
  • MEMBER
  • 2002 FORD WINDSTAR
  • 3.8L
  • V6
  • FWD
  • AUTOMATIC
  • 106,000 MILES
Can you pull the one piece harmonic balancer pulley with the engine still in the van, I have to change the reluctor wheel?
Thursday, November 19th, 2015 AT 10:27 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Yes you can you mayhave to remove a shield to do it. Also replace crank seal.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, November 19th, 2015 AT 12:18 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Here's more if you need it. Make sure to remove rh front wheel and disconnect abs sensor wire make sure to support vehicle on a jack stand the subframe has to be lowered 2" ut sealer on keyway when installing and torque on subframe is 65 ft lbs. Crank pulley is 118 ftlbs.
Images (Click to make bigger)
Thumb
Thumb
Thumb
Was this
answer
helpful?
Yes
No
+3
Thursday, November 19th, 2015 AT 12:24 PM

Please login or register to post a reply.

Related Harmonic Balancer Replace/Remove Content

Harmonic Balancer Removal
GUIDE
Harmonic Balancer Removal
Engine harmonic balancer
VIEW MORE

Sponsored links