SPONSORED LINKS

My name is Dana I have a 2002 Mustang gt and we.

Tiny
DSMITH89
  • MEMBER
  • 2002 FORD MUSTANG
  • 102,000 MILES
My name is Dana I have a 2002 mustang gt and we have recently installed a new bbk clutch cable be cause our other one broke. We can crank it and try to put it in gear and it won't go in gear we tried puttin it in first then cranking it and easing off the clutch and it started pulling but when we took it out of gear it wouldn't go back in gear we have tried running it the only two ways you could thinking we had it run wrong but it's the same thing. Please help we have put almost 2000 dollars in fixing it in six months and this is the only thing we have left to fix
SPONSORED LINKS
Friday, March 29th, 2013 AT 2:48 PM

7 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Did you try the adjustment? Otherwise it is a failed clutch

Roy
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2013 AT 2:51 PM
Tiny
DSMITH89
  • MEMBER
  • 5 POSTS
We have tried tightening and loosening several times the fork and bearing are moving like they should but only time it does right is putting it in first then starting it and easing off and it starts pulling like it should but take it out of gear it won't go back in.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2013 AT 3:04 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
It sounds like your clutch has failed

Roy
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2013 AT 3:15 PM
Tiny
DSMITH89
  • MEMBER
  • 5 POSTS
The cable or part in transmission
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2013 AT 3:22 PM
Tiny
DSMITH89
  • MEMBER
  • 5 POSTS
I know before the cable broke it was shifting fine and when we replaced the o2 sensors we noticed the cable was about to break but it was shifting fine before cable broke
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2013 AT 3:30 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
The clutch is between the engine and trans. The trans must be removed to get to the clutch

Roy
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2013 AT 6:26 PM
Tiny
DSMITH89
  • MEMBER
  • 5 POSTS
Someone told us to try a factory cable back on it but do u think we should just replace the clutch I apologize for so many questions its our first time messing with a newer model clutch
Was this
answer
helpful?
Yes
No
Saturday, March 30th, 2013 AT 5:00 AM

Please login or register to post a reply.

Related Transmission Clutch Cable Content

VIEW MORE

Sponsored links