axle nut size

2002 CHRYSLER PT CRUISER
2.4L • 4 CYL • 2WD • AUTOMATIC
Avatar
JOSH24
  • MEMBER
  • 14 POSTS
I need to know what size socket I need to get to use to get the axle nut off
Feb 13, 2015 at 2:20 PM
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
measure for an approximate size but it will be a 32MM or 28mm socket depending on drivetrain options.

Hub Nut .................... 244 Nm (180 ft. lbs.)
Feb 13, 2015 at 3:06 PM
Advertisement
Avatar
JOSH24
  • MEMBER
  • 14 POSTS
Do I need to remove both drive axle nuts to remove the transmission?
Feb 14, 2015 at 8:44 PM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
both axles need to come out to remove transmission here is a video that shows step by step.

https://youtu.be/6N6b5F2ChyE

Please let us know if you need anything else to get the problem fixed.

Cheers
Feb 15, 2015 at 8:46 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.