Having to keep adding fluid to the slave cylinder, cant find any leaks

Tiny
SCOTT2441
  • MEMBER
  • 2002 CHEVROLET S-10
  • 140,000 MILES
Every few days clutch gets sloppy, after adding fluid pedal gets better untill fluid level drops, cant find a leak anywhere
Wednesday, October 19th, 2011 AT 11:23 PM

1 Reply

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
If you are adding fluid there will be a leak, check under the dash wher the master cylinder attaches to the clutch pedal, pull the rubber boot of the back of the master, if there is any fluid there replace the master if dry, check the slave as it will be leaking.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 27th, 2011 AT 12:39 PM

Please login or register to post a reply.

Related Transmission Clutch Slave Cylinder Content

Throw out Bearing Replacement
GUIDE
Throw out Bearing Replacement
A throw out bearing is used to apply force against the clutch pressure plate to release the clutch and should be replaced as part of the normal clutch job. It is a good idea...
VIEW MORE

Sponsored links