Camry crank pulley stuck

JOEALLEN

MEMBER
2001 TOYOTA CAMRY
6 CYL
FWD
AUTOMATIC
130,000 MILES

Got a Camry V6, 2001, and am changing timing belt. I am having trouble removing crank pulley. It wont slide off and there is little room to put pry bars. How do I go about removing this pulley?

2 Replies

KHLOW2008

EXPERT

DO not use pry bars, Yu can damage the pulley.

Spray some rust penetrant in between the gaps of the pulley and crank shaft and softly tap te pulley with a plastic mallet.

Around the cantral bolt, there are 2 holes which you can use with a puller to pull the pully out.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Saturday, July 2nd, 2011 AT 12:27 PM

JOEALLEN

MEMBER

I got the pulley off. I borrowed 2 types of pullers from a local mechanic. I ended up using the jaw puller, which took 2 small pieces of metal off the outer pulley. The mechanic said that would not matter. Due to the chassis interfering with both pullers, the jaw type worked best. No amount of tapping with a mallet would have worked. There was no way to get behind the pulley properly to do this. Thanks for the reply.

Was this

answer

helpful?

Yes

No

Sunday, July 3rd, 2011 AT 1:25 PM