BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Oil Pressure Sensor
I found an oil leak coming from the "oil.
2001 SATURN L200
I found an oil leak coming from the "oil pressure switch" but I can't seem to access it other than to disconnedt it. Do I have to pull the starter first? Please help.
Friday, January 18th, 2013 AT 12:41 AM
Disconnect engine oil pressure (EOP) switch harness connector.
Remove EOP switch (use 11/16 inch deep well socket).
Apply RTV sealant (or equivalent) to the EOP switch threads.
Install EOP switch.
Engine Oil Pressure Switch: 10 N.M (89 in-lbs)
Connect EOP switch harness connector. Push in connector until a click is heard, then pull back to confirm a positive engagement.
Check oil level and fill if low.
Start engine and check for leaks.
Friday, January 18th, 2013 AT 1:47 AM
to post a reply.
Related Oil Pressure Sensor Leak Content
Thank You For The Responses Sent. To Answer The Question Of Saturntech9 About The Parts I'm Looking For, My Immediate Concern After Reading...
This Is For Saturntech9. I Wrote To Gm Argentina Today Following Instructions From Gm. The Last 8 Digits Of My Vehicle Are 1y555389. Thank...
I Haven't Seen A Gm Dealership Since A Left The States About Four Years Ago! Anyway, Since The E-mails I Sent To The Addresses Given By Gm...
Turns Over But Will Not Fire.
2001 Saturn L200 Computer Codes
Computer Problem 2001 Saturn L200 4 Cyl Front Wheel Drive Automatic 110000 Miles I Have A Saturn That We've Diagnosed As Having A Bad...
Ask a Car Question. It's Free!
Engine Oil Leak
Oil Change and Filter Replacement Chevrolet E
Oil and Filter Change
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.