GRINDING NOISE FROM FRONT RIGHT OF ROVER 25

rosskatstewart
2001 Rover 25
130,000 miles

Garage has put new wheel bearing on and change front axle but still noise when driving straight and turning left?

Do you

have the same problem?

Yes

No

Saturday, February 4th, 2012 AT 3:53 PM

3 Replies

rasmataz
Member

Inspect the driveaxles Joints/Boots, also if its install properly

Thank you for replying so quickly. But I have, nt a clue about the mechanical workings inside the car! I don, t suppose your able to upload a pic of what/how it should look like?

Was this

answer

helpful?

Yes

No

Saturday, February 4th, 2012 AT 5:37 PM

rasmataz
Member

Sorry No pic available-its the axle that connects to the wheel hub and transmission

Was this

answer

helpful?

Yes

No

Saturday, February 4th, 2012 AT 6:05 PM

Please login or register to post a reply.

Transmission Shifting Heard Grinding Noise

1995 lexus es300 od light flashing, engine revvving at 3000 rpms 40 mph or higher. Car shifts to p, n, d or r with ease, slight noise.

Asked by larryyarb ·

15 ANSWERS

4 IMAGES

I'm Getting A Grinding Noise When I Hold The ...

If I drive thru the gears, approx. To 50 60 mph, no problem. But if I have to drive thru town at 20 25 mph, I have to keep my rpm's to

Asked by thunder ·

17 ANSWERS

After Cranking And With The Engine Running, The ...

Even after turning the engine off and removing the key, the starter continued to grind. It went for approx 10 minutes then cut off.

Asked by wmsonrebel ·

8 ANSWERS

2 IMAGES

Grinding Noise From Front Drivetrain

1984 jeep cj7, I ran the front hubs in 4x4 for a few days and cycled through 4 hi and 4 lo. After doing this when I selected 4x2 and s

Asked by gwatts1040 ·

13 ANSWERS

6 IMAGES