ENGINE IS STALLING AND TRANSFER CASE LIGHT IS ON

  • Tiny
  • Bscudjoe
  • 2001 NISSAN 180SX
  • 154,000 MILES

My vehicle, Nissan pathfinder 2001 model stalls when driving after l changed the camshaft sensors. The engine started bucking and my mechanic used a monitor to check which indicated that camshaft sensors were faulty.I have just replaced the camshaft sensors but the vehicle still sucks when driving so the problem remains unresolved.
What could be the problem?

Do you
have the same problem?
Yes
No
Wednesday, December 14th, 2011 AT 2:59 PM

3 Replies

  • Tiny
  • ASEMaster6371
  • EXPERT
  • 25,554 POSTS

A code never identifies a bad part just a failed system.

What is the problem you have besides the cam codes?

Roy

Was this
answer
helpful?
Yes
No
Wednesday, December 14th, 2011 AT 3:04 PM
  • Tiny
  • Bscudjoe
  • MEMBER

What are the possible causes of******** after sensors and plugs are changed.

Was this
answer
helpful?
Yes
No
Wednesday, December 14th, 2011 AT 3:27 PM
  • Tiny
  • ASEMaster6371
  • EXPERT
  • 25,554 POSTS

It could be a timing chain having too much slack. There are many possibilities. A shop with a scan tool can track it down for you as doing it at home is a lot of guesses.

What were the codes?

Roy

Was this
answer
helpful?
Yes
No
Wednesday, December 14th, 2011 AT 3:40 PM

Please login or register to post a reply.

Other Four Wheel Drive Light Questions