Codes P0713, P1757, P1762, P0711

Tiny
CHRISTAL1
  • MEMBER
  • 2001 JEEP GRAND CHEROKEE
  • 4.0L
  • V6
  • 4WD
  • AUTOMATIC
  • 120,000 MILES
In my vehicle listed above Laredo I'm getting the codes p0711, p0713, p1757, p1762. What could be causing those codes to show? My vehicle is stuck in limp mode. I've tried resetting it. Could it be a faulty governor pressure solenoid? I had to replace the spring from in the valve body since it cleanly broke into two pieces.
Do you
have the same problem?
Yes
No
Friday, February 22nd, 2019 AT 7:12 PM

5 Replies

Tiny
SCGRANTURISMO
  • MECHANIC
  • 4,897 POSTS
Hello,

These are transmission Direct Trouble Code (DTC)s. I have included in the diagrams below the step by step troubleshooting flowcharts for DTCs P0711 and P0713. Please go through them and let us know what you find out. I will post the same for DTCs P1757 and P1762 in my next reply.

Thanks,
Alex
2CarPros
Was this
answer
helpful?
Yes
No
Friday, February 22nd, 2019 AT 9:17 PM
Tiny
SCGRANTURISMO
  • MECHANIC
  • 4,897 POSTS
Hello again,

As promised here are the troubleshooting flowcharts for DTCs P1757 and P1762. Please go through these as well and get back to us with what you find out.

Thanks,
Alex
2CarPros
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2019 AT 5:54 AM
Tiny
CHRISTAL1
  • MEMBER
  • 6 POSTS
I'm not entirely sure on how to do this. What tools am I going to need? I'm a 22 year old female that only knows some about cars since this is my first car. I've tried to help with all the repairs though.
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2019 AT 10:44 AM
Tiny
SCGRANTURISMO
  • MECHANIC
  • 4,897 POSTS
Hello,

You are going to need a code reader with the ability to read live data.

Thanks,
Alex
2CarPros
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2019 AT 2:27 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,544 POSTS
This first code is for the transmission temperature problem the rest are transmission related as well. Can you check the transmission wiring plug to make sure it is in good condition? I have seen corrosion cause issues like this. Check out the diagrams (below). Please let us know what you find.
Was this
answer
helpful?
Yes
No
Saturday, February 23rd, 2019 AT 5:50 PM

Please login or register to post a reply.

Sponsored links