My question is how hard is an ECU to.

RIEBED

MEMBER
2001 HYUNDAI ELANTRA
197,000 MILES

Hi, my question is how hard is an ecu to install? Is there any programming to do to the unit or can I just remove and replace it and plug it back in?

Do you

have the same problem?

Yes

Sunday, January 8th, 2012 AT 2:05 AM

1 Reply

RIVERMIKERAT

EXPERT

For location, see image. R&R is removal of a strap and/or bolts securing the ECM in place and disconnecting the main harness. ECM will need to relearn. It may take as much as 30 minutes of driving.

Image (Click to enlarge)

Please login or register to post a reply.

Related Engine Computer Replace/Remove Content

2001 Hyundai Elantra Obd Ii Computer Reading

The Obd Reading Is P0105 "manifold Ablsolute Pressure/barometric Pressure Circuit Malfunction." Could This Be As Simple As A Loose Wire On...

Asked by crookston ·

1 ANSWER

2001

HYUNDAI ELANTRA

Vehicle's Computer Issue

I Bought The Car And It Had A Broken Timing Belt. This Had Bent The Valves In The Number Four Cylinder And So What I Did Was To Go And...

Asked by Monte Brown ·

4 ANSWERS

4 IMAGES

2002

HYUNDAI ELANTRA

2002 Hyundai Elantra Diagnostics Pins

Will You Please Tell Me Which Pins To Jumper To Get Diagnostic Codes? Also, Where Are The Pins For Diagnostics Located?

Asked by awog22 ·

1 ANSWER

2002

HYUNDAI ELANTRA

1997 Hyundai Elantra

Computer Problem 1997 Hyundai Elantra 4 Cyl Front Wheel Drive Automatic I Took Car To Be Inspected Computer Could't Read It Came Home...

Asked by bandit69 ·

1 ANSWER

1997

HYUNDAI ELANTRA

1999 Hyundai Elantra Want To Fix It Myself.

Where Do I Find The Pcm And How Do I Replace It On My Hyundai Elantra 1999?

Asked by marij1419 ·

1 ANSWER

1999

HYUNDAI ELANTRA

Sponsored links

Ask a Car Question. It's Free!