GMC Jimmy 4WD

Tiny
FLIPFLOPAROO182
  • MEMBER
  • 2001 GMC JIMMY
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 138,000 MILES
My 2001 gmc jimmy's 4wd isnt engaging, I push the button and all it does is tick like its trying to engage but it just flashes then goes back into 2wd
Do you
have the same problem?
Yes
No
Sunday, November 21st, 2010 AT 7:01 PM

2 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
From the system description, most probaly trouble codes would be stored in system so get a scan done and let me know if any trouble codes are found.

System is equipped with self diagnostic and a scan tool is required to check for trouble codes. Kindly take note that a generic code reader would not be able to read the codes.
Was this
answer
helpful?
Yes
No
+1
Monday, November 22nd, 2010 AT 5:17 PM
Tiny
MADMIKE1735
  • MECHANIC
  • 951 POSTS
75% of the time this is caused by a faulty switch, however without testing the switch we cant be certain. If the switch is good, then we should look into the module located behind the passenger side kickplate inside the vehicle, as thats the most overlooked. Have that tested.
Was this
answer
helpful?
Yes
No
+1
Thursday, November 25th, 2010 AT 3:48 AM

Please login or register to post a reply.

Sponsored links