Serpentine belt diagram

Tiny
SPARKYTJ1
  • MEMBER
  • 2001 FORD FOCUS
I need a diagram to put the serpentine belt back on my 2001 ford focus
Do you
have the same problem?
Yes
No
Saturday, February 19th, 2011 AT 4:22 AM

20 Replies

Tiny
MHPAUTOS
  • EXPERT
Check this link for timing belt & serpentine belt fittings.

https://www.2carpros.com/diagrams/ford/focus/2001

this guide will give you an idea of what you are in for when doing the job.

https://www.2carpros.com/articles/replace-serpentine-belt

For both a/c and no a/c

Check out the diagrams (Below)

Please let us know what happens.

Cheers
Was this
answer
helpful?
Yes
No
+4
Saturday, February 19th, 2011 AT 4:28 AM
Tiny
SPARKYTJ1
  • MEMBER
Thank you I love this site got the job done and saved money! I love this site
Was this
answer
helpful?
Yes
No
+2
Saturday, February 19th, 2011 AT 4:47 AM
Tiny
METALMAN24
  • MEMBER
  • 2001 FORD FOCUS
2001 Ford Focus 4 cyl Front Wheel Drive Automatic

I'm looking for a belt diagram for a 01 focus zts zetec DOHC can't find one anywhere. Someone please help!
Was this
answer
helpful?
Yes
No
-1
Thursday, November 30th, 2017 AT 3:57 PM (Merged)
Tiny
MERLIN2021
  • EXPERT


http://www.2carpros.com/forum/automotive_pictures/62217_SerpVINP_1.jpg



http://www.2carpros.com/forum/automotive_pictures/62217_SerpVINPWAC_1.jpg

Was this
answer
helpful?
Yes
No
+10
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
2CARPROS-ARCHIVES
  • MEMBER
  • 2001 FORD FOCUS
  • 100,000 MILES
How to fit a drive belt with diagram
Was this
answer
helpful?
Yes
No
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
CJ MEDEVAC
  • EXPERT
I DON'T KNOW WHAT YOUR ENGINE SIZE IS

MAY NOT MATTER

LEMME KNOW HOW IT GOES

THE MEDIC
Was this
answer
helpful?
Yes
No
-1
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
2CARPROS-ARCHIVES
  • MEMBER
  • 2001 FORD FOCUS
  • 102,000 MILES
I need a diagram and explanation on how to fit back a drive belt for a 1.6 ford focus 2001
Was this
answer
helpful?
Yes
No
+6
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • EXPERT
If you go to our homepage under the DIY section, there is a choice of drive belt routing. That will show you how the belt goes on.
Was this
answer
helpful?
Yes
No
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
DARRENLOOSELY@HOTMAIL.CO.
  • MEMBER
  • 2003 FORD FOCUS
  • 4 CYL
  • 2WD
  • MANUAL
  • 68,893 MILES
Other Category problem
2003 Ford Focus 4 cyl Two Wheel Drive Manual 68893 miles

can anyone give me a drive belt diagram for a 1.8 focus zetec with air con
Was this
answer
helpful?
Yes
No
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
MERLIN2021
  • EXPERT
There are 6 possibilities, here are the 3 engines with A/C...


http://www.2carpros.com/forum/automotive_pictures/62217_Belt_1.jpg



http://www.2carpros.com/forum/automotive_pictures/62217_Belt2_1.jpg



http://www.2carpros.com/forum/automotive_pictures/62217_Belt3_1.jpg

Was this
answer
helpful?
Yes
No
+14
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
KING MICHAEL
  • MEMBER
Can you help me I need a drive belt diagram for a w reg ford focus zetec 3 door.
Was this
answer
helpful?
Yes
No
+2
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
MERLIN2021
  • EXPERT
Give me the engine size in litres usually found on the engine, but also on the white label under the hood
Was this
answer
helpful?
Yes
No
-2
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
HIPIS
  • MEMBER
Concerns about the timing belt is the way I have a question. Can someone explain to me how to replace the in the Ford Focus? Maybe one of you has a description of the exchange or litter may be a link.
Was this
answer
helpful?
Yes
No
-1
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
MERLIN2021
  • EXPERT
I recommend you buy a shop manual for it at a parts store, you will need the info to avoid damaging internal engine parts, and as a reference as you do the work.
Was this
answer
helpful?
Yes
No
-1
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
JOHN MURRAY
  • MEMBER
  • 2002 FORD FOCUS
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 70,000 MILES
Interior problem
2002 Ford Focus 4 cyl Front Wheel Drive Automatic 70,000 miles

I changed the alternator on the engine and when I
went to put the serpentine belt back it is too long.
It's like 6" or so too long now. I checked the routing
several times and it's too long. What did I do wrong?
Was this
answer
helpful?
Yes
No
+1
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
MHPAUTOS
  • EXPERT
Hi there, check the link for the belt information.

Mark (mhpautos)

http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/focus/2002_ford_focus_drive_belt_routing_diagram.htm
Was this
answer
helpful?
Yes
No
Thursday, November 30th, 2017 AT 3:58 PM (Merged)
Tiny
MADELINE88
  • MEMBER
  • 2001 FORD FOCUS
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 64,000 MILES
Hi, I had gone to my mechanic. My car was shaking and whistling noises where coming from the car. They said there was a tear in the drive belt they replaced it but I had to take it back because they obviously put in the wrong belt. They replaced it again and it is obviously the wrong belt again. I am going back tomorrow. I need to know what belt I need to put in the car. I need to know what make and size because I see that they are not putting in the right belt. I hope what they did does not ruin my car.
Was this
answer
helpful?
Yes
No
Monday, August 19th, 2019 AT 6:50 PM (Merged)
Tiny
RENAUDTN
  • MEMBER
I'd be very surprised if they installed the wrong belt twice.
I don't think they installed the wrong belt; your problem is probably not the belt; I don't think a torn belt would make your car shake (although I could be wrong). I'd be asking your mechanic to check your tires, axles, cv joints, struts, etc
You may want to have your car inspected by a different mechanic.
Was this
answer
helpful?
Yes
No
Monday, August 19th, 2019 AT 6:50 PM (Merged)
Tiny
1SWEETDEAL
  • MEMBER
  • 2000 FORD FOCUS
2000 Ford Focus

how do I adjust the tensioner to replace the belt?
Was this
answer
helpful?
Yes
No
Monday, August 19th, 2019 AT 6:50 PM (Merged)
Tiny
SCHRIMPIEMAN
  • MEMBER
Jack up front end, remove passenger side front wheel and plastic splash guard. Tensioner has (I think) a 15-mm bolt at the pulley end. Force the tensioner to give slack on the serp belt. You'll need some dexterity to work around the close confines space, but with a little patience and and assistant, you can remove the belt. Be sure to check both the idler pulley and tensioner pulley for abnormal noise. These pulleys are common to go bad / need replacement.

Take special note of how the belt runs before you pull it off. It twists and winds around quite interesting. If you forget, you'll be scratching your head trying to remember how it goes on again.
Was this
answer
helpful?
Yes
No
Monday, August 19th, 2019 AT 6:50 PM (Merged)

Please login or register to post a reply.

Recommended Guides