Balljoints

Tiny
BEARPAWS1
  • MEMBER
  • 2001 FORD EXPLORER
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 170,000 MILES
Can the balljoints on a 2001 ford explorer sport/ v6/4x4/4.0ltr be changed without replacing the control arm
Sunday, August 14th, 2011 AT 6:19 PM

1 Reply

Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,004 POSTS
MY STEP DAUGHTER ORDERED THE WHOLE KIT ON ebay, FOR HER '96 EXPLODER. PRICE WAS RIGHT!

BOTTOM JOINTS WERE SEPARATE ITEMS, TOP BALL JOINTS WERE FACTORY INSTALLED ON THE ARMS.

TOOK ABOUT 3 HOURS, GOING CAUTIOUSLY. AND USING A MONSTER C-CLAMP AND LARGE SOCKETS TO PRESS WITH. ALL INSTALLED, ON VEHICLE. NO GOING TO MY BUDDY'S PRESS

ON HER'S, THERE WERE RETAINING CLIPS ON BALL JOINT'S WE KINDA DIDN'T SEE 'EM AT FIRST!

HERE'S THE CLAMP--USING IT ON MY JEEP'S TRANNY, IN THIS PIC

I SHOULDA TOOK PICS AS WE REPAIRED HER EXPLODER!

THE MEDIC
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, August 14th, 2011 AT 6:47 PM

Please login or register to post a reply.

Related Lower Control Arm Replace/Remove Content

Lower Control Arm Bushing Replacement
VIDEO
Lower Control Arm Bushing Replacement
Instructional repair video
Control Arm Bushing Replacement - Lower
GUIDE
Control Arm Bushing Replacement - Lower
A lower control arm is designed to act as a support between the car frame and the spindle which is where the tire is located. Every car is designed with control arms no...
VIEW MORE

Sponsored links