ASK A QUESTION
BECOME A MEMBER
Login with Facebook
NOT A MEMBER?
TERMS AND CONDITIONS
How much play should there be on the front rotors forward and backward between the studs and holes
2001 FORD EXPEDITION
Grinding/clicking noise varies with speed, only present in drive and at slow speeds (5 to 20 mph)
have the same problem?
Friday, November 11th, 2011 AT 11:42 AM
Mike the brake rotor if its within specs-you sure its not coming from the wheel bearings
Friday, November 11th, 2011 AT 11:56 AM
When the wheel lug nuts are correctly torqued, the stud to rotor clearance does not matter as the rotor would be fixed.
Friday, November 11th, 2011 AT 12:01 PM
to post a reply.
Related Brake Rotor Content
2002 Ford Expedition Rotors On 2002 Expedition
I Cant Seem To Get The Front Rotor Off Of My Truck. I Was Wondering If I Should Use Heat And Then Try To Hammer It Off, Or Is The Rotor...
Rotor Stuck on Hub/Axle
Brake rotor issues can impair your vehicle's performance and safety. One common problem is a rotor becoming stuck on the axle flange or bearing hub. This guide...
2001 Ford Expedition Losing Brake Pedal Pressure
Brake Pedal Seems To Be Engaging A Little Lower Than Normal. Truck Stops Fine However If At A Stop Light The Pedal Slowly Starts To Drop...
Where The Brake Fluid Goes In My Truck, Right In...
Where The Brake Fluid Goes In My Truck, Right In Front Of That There Is This Gray Plug In That Is Leaking Brake Fluid. I Just Need To Know...
2003 Ford Expedition 2003 Expedition Brake Pedal Goes...
When I Have Driven For A While And Quickly Put On The Brakes To Abruptly Stop, Sometimes The Pedal Will Go All The Way To The Floor And...
Brake Pedal Will Begin To Go Down Real Slow?
When I Step On The Brakes, The Truck Will Stop (98 Expedition). After A Few Seconds, The Pedal Will Begin To Go Down Real Slow. Everything...
Ask a Car Question. It's Free!
Axle Bearing CV Bearing Replacement
Wheel Stud Replacement Chevrolet Cavalier
Wheel Bearing Replacement
Online car repair manuals
Terms & Conditions
© 1999 - 2024 2CarPros, Inc.