Turn signal flasher relay location

My info says behind center of dash. Blower/flasher relay block.

01 expedition. Turn signals don't work or flashers turn signal starts to working then stop. Heat works but not hot

Pull hvac fuse inside car with key on that may allow actuators to reset. Check item in pic then check to see if power goes through multi function switch arrow shows input and outputs

I replaced my flasher unit, and my signal lights still blink 1-2 times then nothing. My hazards and brake lights work fine. I push the signal arm down and it blinks 1-2 times then stops, it even clicks back into its normal position after I make a turn. Left or right does the same thing. My brake lights work and so do my hazard lights and windshield wipers. All bulbs are working also.

Cold be a bad ground for flasher or the turn sign al swith may be going bad. Check fuse 1 and 23 in central junction box then if you have atrailer wiring then check to see if there isn't a bare spot or wire rubbed through causing the problem.

Thank you. I'll check as soon as I can. I'll let you know what I find