SPONSORED LINKS

Door Locks

Tiny
DAN BURTON
  • MEMBER
  • 2001 FORD ESCAPE
  • 3.1L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 258,000 MILES
Today when I went to lunch, my drivers door would not unlock when using the key FOB. The other doors unlock just fine. After I got into the car through the passenger side I notice that when I use the key FOB or the unlock button on the drivers door to attempt to unlock doors, the drives door manual lock lever tries to unlock but just can't seem to get it done. It appears to me that the lock mechanism inside the drivers door might be jammed. What should I do? I know I could take off the inside panel but without being able to open the door I'm not sure how I can do that.
SPONSORED LINKS
Tuesday, September 2nd, 2014 AT 10:38 AM

1 Reply

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
This happens when the door lock actuator seized up due to moisture. You will need to remove the door panel to get at the actuator here is a guide to help you get started. You may need to remove the driver's seat.

https://www.2carpros.com/articles/door-panel-removal

Here are diagrams to help you see what you are in for when doing the job. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Cheers
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, September 2nd, 2014 AT 10:48 AM

Please login or register to post a reply.

Related Door Lock Switch Content

VIEW MORE

Sponsored links