Rough idle at cold start

Tiny
SCOTTPER58
  • 2001 FORD CROWN VICTORIA
  • V8
  • 2WD
  • AUTOMATIC

2001 crown vic On my first startup of the day have low idle(bat light low volt) once the car warms up all symptoms disappear is this a ect sensor problem

Do you
have the same problem?
Yes
No
Tuesday, June 21st, 2011 AT 7:51 PM

5 Replies

Tiny
RASMATAZ
  • MEMBER

Check the charging system and also the ECT sensor

Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 8:06 PM
Tiny
SCOTTPER58
  • MEMBER

Alternator is charging at14v. Just checked resistance on etc and is very low. 1.7kohms

Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 10:00 PM
Tiny
WAY2OLD
  • MEMBER

Check the Idle Air Control motor. If it is dirty or plugged, it will give a low and rough idle condition until it warms up.

Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 11:07 PM
Tiny
SCOTTPER58
  • MEMBER

Thanks, I replaced the idle air control valve

Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 11:33 PM
Tiny
SCOTTPER58
  • MEMBER

Wher is the ect sensor on 2001 crown vic, wha I think is the ect has a 2 blade connecter and is coated with plumbers putty

Was this
answer
helpful?
Yes
No
Tuesday, June 21st, 2011 AT 11:36 PM

Please login or register to post a reply.

Other Engine Idle Rough Questions