Map light switch

Tiny
ROBBY1234
  • MEMBER
  • 2001 CHEVROLET SILVERADO
  • 8.1L
  • V8
  • 4WD
  • AUTOMATIC
  • 150,000 MILES
The map light switch in the overhead console came apart. I removed the console to get better access, but now I'm not sure how to put the switch back together. It has about 4-5 parts inside the plastic wire /button holder including a spring. Can anyone help with a drawing or instructions?
Do you
have the same problem?
Yes
No
Thursday, December 18th, 2014 AT 4:07 PM

1 Reply

Tiny
KASEKENNY
  • EXPERT
Unfortunately, we don't have a process on how to reassemble the switch as I don't think it is meant to come apart so it may not go back together properly even if we had the process.

However, based on this I would suggest testing the switch before you put everything back together because I suspect you will have to replace it.

https://www.2carpros.com/articles/how-to-use-a-test-light-circuit-tester

Please see the info below and let me know what questions you have on this. If you can get a picture of what you are dealing with then we may be able to put it together the best we can figure.

Thanks
Was this
answer
helpful?
Yes
No
-1
Thursday, November 25th, 2021 AT 8:42 AM

Please login or register to post a reply.

Sponsored links