I am attempting to put a new radio in my car

Tiny
SHELLLREYNOLDS
  • MEMBER
  • 2001 CHEVROLET CAVALIER
I am attempting to put a new radio in my car, but something with the wires to connect the new radio to the car is different. It says it needs to be a 12V DC. And apparently I don't have that in my car. Is there anything I can do about it, or was this all a waste?
Do you
have the same problem?
Yes
No
Sunday, February 5th, 2012 AT 9:28 PM

4 Replies

Tiny
HMAC300
  • EXPERT
It is 12volt dc
Was this
answer
helpful?
Yes
No
Sunday, February 5th, 2012 AT 10:11 PM
Tiny
HMAC300
  • EXPERT
It shoudl justplug in at back of radio
Was this
answer
helpful?
Yes
No
Sunday, February 5th, 2012 AT 10:11 PM
Tiny
SHELLLREYNOLDS
  • MEMBER
But it's not the same size as what the radio needs. The radio needs a 12 volt dc and it doesn't fit with what is in the back of the radio area.
Was this
answer
helpful?
Yes
No
Sunday, February 5th, 2012 AT 10:14 PM
Tiny
HMAC300
  • EXPERT
There are different sized radios available if you biught this then take it back to one that fits. Also there are adapters available.
Was this
answer
helpful?
Yes
No
Sunday, February 5th, 2012 AT 11:34 PM

Please login or register to post a reply.

Sponsored links