01 x5 3.0 code intake cam over advanced 6deg car starts idles good lite came on initial start up after repl head gasket head gasket/head were ok the problem was the frozen crankcase vent valve cold weather freeze up
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Sunday, May 8th, 2011 AT 1:44 PM
8 Replies
KHLOW2008
EXPERT
Have you solved the problem?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, May 9th, 2011 AT 1:43 PM
RAY DICKERSON
MEMBER
I put in a new intake cam sensor ie the scanner showed the intake cam over advanced 6 degrees so I reset the ses lite and went on a 60 mile ride lite did not come on today I start car ses lite is on
Was this
answer
helpful?
Yes
No
Thursday, May 12th, 2011 AT 12:32 AM
KHLOW2008
EXPERT
What was the trouble code retrieved?
Have another scan performed and see what the new trouble code is.
Was this
answer
helpful?
Yes
No
Thursday, May 12th, 2011 AT 5:50 PM
RAY DICKERSON
MEMBER
The trouble code is POO11 the same code each time what can cause/cure this code
Was this
answer
helpful?
Yes
No
Friday, May 20th, 2011 AT 2:42 AM
KHLOW2008
EXPERT
Recheck the cam and crank timing alignment. If the chain had not been installed correctly, it would result in the doce triggering.