How do I adjust my shift so it will engage?

Tiny
RANGERBERRY
  • MEMBER
  • 2001 AUDI S4
  • 90,000 MILES
Replaced a clutch on a 2001 S4 Audi, put everything back together, engine turns over but the car only has reverse. Not sure if I didnt space something right or what, just need to narrow it down so I dont have to rip the whole car apart again.

Help, im a poor soldier trying to fix his own problems
Do you
have the same problem?
Yes
No
Monday, November 28th, 2011 AT 8:27 PM

3 Replies

Tiny
DOCFIXIT
  • EXPERT
System hydraulic no adjustment. Can adj. Pedal freeplay see diagram gap 0.126 (3.2mm) will trans go into gears engine off? Does it grind when attempting first? Was pressure plate and bearing replaced? Bleed system?
Was this
answer
helpful?
Yes
No
Monday, November 28th, 2011 AT 9:14 PM
Tiny
RANGERBERRY
  • MEMBER
Pressure plate, bearing and fly wheel were replaced. Clutch did not need to be bled, any suggestions?
Was this
answer
helpful?
Yes
No
Tuesday, November 29th, 2011 AT 11:37 PM
Tiny
DOCFIXIT
  • EXPERT
What happens if put in first engine off then attempt to start?
Was this
answer
helpful?
Yes
No
Saturday, December 3rd, 2011 AT 5:34 PM

Please login or register to post a reply.

Recommended Guides