Where would I get the Drivebelt tension.

Tiny
ANONYMOUS
  • 2000 SUBARU IMPREZA
  • 176,000 MILES

Where would I get the Drivebelt tension specifications?

Saturday, February 16th, 2013 AT 12:02 AM

1 Reply

Tiny
ASEMASTER6371
  • EXPERT
  • 25,533 POSTS

Belt tension

(A)
replaced: 7 - 9 mm (0.276 - 0.354 in)
reused: 9 - 11 mm (0.354 - 0.433 in)

(B)*
replaced: 7.5 - 8.5 mm (0.295 - 0.335 in)
reused: 9.0 - 10.0 mm (0.354 - 0.394 in)

There is no belt (B) on models without an air conditioning. C/P crankshaft pulley
GEN Generator
P/S Power steering oil pump pulley A/C Air conditioning compressor pulley
I/P Idler pulley.

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Saturday, February 16th, 2013 AT 2:04 AM

Please login or register to post a reply.

Related Serpentine Belt Tensioner Questions

Help us by donating