SPONSORED LINKS

2000 Saturn SL1 Starts then immediatley dies

Tiny
TRAVIZTY
  • MEMBER
  • 2000 SATURN SL1
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 206,254 MILES
Went to see my brothers baby at the hospital and the car drove there fine no problems. Came back out and car started then immediatley died. Tried a few things to get it running and no luck. Its been sitting for a while now.I have replaced injectors, fuel filter, fuel pump, MAP senor, IAC valve, for some reason my obdII reader wont link to the vehicle was wondering if maybe the computer was fried. If anyone has a clue what could be going on please respond thank you.
SPONSORED LINKS
Sunday, January 2nd, 2011 AT 6:45 PM

8 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
So does your scan tool power up off obd2 connector?Have you checked for spark?Have you checked the actual fuel pressure to see if it has enough to start and run?Have you checked to see if you have a injector pulse to the injector's?Is the security light on solid or flashing while it doesn't start?Have you made sure the battery cable's are clean and tight?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Sunday, January 2nd, 2011 AT 8:56 PM
Tiny
TRAVIZTY
  • MEMBER
  • 5 POSTS
Scan tool powers up and runs through but says it cant link with the vehicle. Yes I have spark, I checked the pulse for the injectors fine. It starts then dies out right away after that the security light flashes and for about 15 seconds and then goes solid. Battery cables r clean and tight. Fuel pressure is at 47psi. Cant think of much more hoping I can find someone here whop can help I appreciate the quick response
Was this
answer
helpful?
Yes
No
+3
Sunday, January 2nd, 2011 AT 11:06 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Let's try this follow the pass lock relearn I posted and see if it will start and we will go from there.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+1
Monday, January 3rd, 2011 AT 1:12 AM
Tiny
TRAVIZTY
  • MEMBER
  • 5 POSTS
So I tried the relearn but my security light never goes out at all any ideas? Thanks for all your help so far
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 4th, 2011 AT 10:20 PM
Tiny
TRAVIZTY
  • MEMBER
  • 5 POSTS
Pretty sure it is not the computer got another one and installed it but no luck.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 4th, 2011 AT 10:25 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
So did you check all the fuse's?
Was this
answer
helpful?
Yes
No
Tuesday, January 4th, 2011 AT 10:28 PM
Tiny
TRAVIZTY
  • MEMBER
  • 5 POSTS
Yea none seem to be bad but im about to check it out again with a multimeter this time
Was this
answer
helpful?
Yes
No
Tuesday, January 4th, 2011 AT 11:02 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Yeah make sure you have power to both side's of each fuse.
Was this
answer
helpful?
Yes
No
Wednesday, January 5th, 2011 AT 5:48 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links