SPONSORED LINKS

Ignition replacement

Tiny
LOIS
  • MEMBER
  • 2000 SATURN SEDAN
  • 4 CYL
I replaced the ignition switch (Key part) after doing so the car will start but will not remain running. What have I done wrong or do I still need to do. It is a 2000 Saturn LS.
Saturday, January 15th, 2011 AT 10:34 PM

7 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Try the pass lock relearn I posted let me know if it start's.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 15th, 2011 AT 10:44 PM
Tiny
LOIS
  • MEMBER
  • 4 POSTS
After changing the ignition the car started but it will not remain running.
Was this
answer
helpful?
Yes
No
Saturday, January 15th, 2011 AT 11:04 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Ok you already said that so when it starts for a second and dies is the security light on solid or flashing?
Was this
answer
helpful?
Yes
No
Saturday, January 15th, 2011 AT 11:18 PM
Tiny
LOIS
  • MEMBER
  • 4 POSTS
The security light is flashing.
Was this
answer
helpful?
Yes
No
Sunday, January 16th, 2011 AT 3:15 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Follow the pass lock learn I already posted and let me know if it start's.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 16th, 2011 AT 7:08 AM
Tiny
LOIS
  • MEMBER
  • 4 POSTS
No it didn't work. We even did it 2 times. What else can we try?
Was this
answer
helpful?
Yes
No
Sunday, January 16th, 2011 AT 4:51 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Did it started before you replaced the ignition housing?Or did you just replace the ignition cylinder?Also when you did the pass lock learn you tried to start it didn't turn the key from the run position waited for the security light to turn off. Then turned the key off for 30 second's then try to start it again never turned the key off kept it at the run position till the security light turned off. Then turned the key off for 30 second's. Then tried to start it left the key in the run position until the security light turned off. Then turned the key off for 30 second's. Then the car should start.
Was this
answer
helpful?
Yes
No
Sunday, January 16th, 2011 AT 10:17 PM

Please login or register to post a reply.

Related Ignition Switch Replace/Remove Content

Sponsored links