Ford 4.6 2000 150f

Tiny
DPARK
  • MEMBER
  • 2000 FORD F-150
  • V8
  • 2WD
  • AUTOMATIC
  • 60,000 MILES
How to remove tube from top side of intake manifold.
goes to heater core
Sunday, December 19th, 2010 AT 4:16 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,334 POSTS
If you are refering to the one that attaches in the water pump, there is a retaining bolt that needs removed, and then you need to carefully turn an pull the tube out. If damaged, most parts stores have them for around 15.00. NOTE: There is a rubber O-ring at the end. Make sure to replace it and place a thin coating of coolant on it before you reinstall it.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, January 10th, 2011 AT 12:35 AM

Please login or register to post a reply.

Related Intake Manifold Replace/Remove Content

Intake Manifold Replace
VIDEO
Intake Manifold Replace
Instructional repair video
Intake Manifold Replacement
GUIDE
Intake Manifold Replacement
When an intake gasket or intake manifold fails it can create a vacuum or coolant leak which will cause the engine to run poorly or overheat. This can happen over time, if...
VIEW MORE

Sponsored links