I need the Timing belt and CAM gears positioning on a 2000 Daewoo Leganza
LSFOOOSURTLEVER
MEMBER
2000 DAEWOO LEGANZA
FWD
AUTOMATIC
I took the timeing gear off the cam and it moves so I need to know were the cam has to be to with the marks I dont know much about timeing and cams thanks
Do you
have the same problem?
Yes
No
Wednesday, March 9th, 2011 AT 7:28 AM
5 Replies
MHPAUTOS
MECHANIC
31,938 POSTS
Did you have the engine set at TDC #1 before removing the timing belt?
Mark (mhpautos)
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, March 9th, 2011 AT 9:08 AM
LSFOOOSURTLEVER
MEMBER
10 POSTS
The head gasket was blowen and it ran but now I got the head off so what do I do I got one cam off and the timin gear is off the cam on the other one what do I do? Just put the gear back on and go to the timein marks?
Was this
answer
helpful?
Yes
No
Wednesday, March 9th, 2011 AT 6:24 PM
MHPAUTOS
MECHANIC
31,938 POSTS
As long as all the timing marks are aligned when you fit the head and they do not alter while fitting the belt, you will be fine, can you see all the timing marks?
Was this
answer
helpful?
Yes
No
+1
Wednesday, March 9th, 2011 AT 9:19 PM
LSFOOOSURTLEVER
MEMBER
10 POSTS
Yes what ones do I use and to 12 and six on the bottom but I need detail about were and what ones and how to tourk the head down I know there is a certin way
Was this
answer
helpful?
Yes
No
+1
Thursday, March 10th, 2011 AT 6:14 PM
MHPAUTOS
MECHANIC
31,938 POSTS
Align as per pic, crank at 6-00 o'clock cams as pic indicates