CYLNDER HEAD

  • Tiny
  • Roffice
  • 2000 DAEWOO LANOS
  • 4 CYL
  • FWD
  • MANUAL

Do I need to change head bolts when replacing head gaskets

Do you
have the same problem?
Yes
No
Friday, February 25th, 2011 AT 9:58 PM

1 Reply

  • Tiny
  • Mhpautos
  • EXPERT
  • 30,747 POSTS

Normal protocols say that step tensions can re use old bolts, torque to yield ( tensioning by deg of bolt rotation) always fit new bolts, in my business I always fit new head bolts, they are fairly cheap and that way there is no chance of a bolt stretch problem.

Mark (mhpautos)

Was this
answer
helpful?
Yes
No
Friday, February 25th, 2011 AT 11:18 PM

Please login or register to post a reply.

Other Cylinder Head Replace/Remove Questions