2000 Chevrolet Venture maf air flow sensor!

Tiny
JOBDANIEL1
  • MEMBER
  • 2000 CHEVROLET VENTURE
  • 3.4L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 230,000 MILES
So this is my case! Car is running fine but could go better! I put my van on the obd2 and came up with a mass air flow sensor code!I immediately started to work on it! I get correct voltage in the connector but I'm not sure what the ground should indicate! Should I check it with the volts? Ohms? Second what could be my problem if when I unconnect my maf nothing happens car keeps on going normally? I'm thinking a leak but could that just be it? Thank you guys!
Do you
have the same problem?
Yes
No
Tuesday, January 27th, 2015 AT 10:24 AM

2 Replies

Tiny
JOHNNYT73
  • EXPERT
Ok, was the sensor bad or was it the wiring at the connector? You check your ground with ohms. Not really looking for an amount. Your just checking that you have ground.
Was this
answer
helpful?
Yes
No
Tuesday, January 27th, 2015 AT 12:03 PM
Tiny
JOBDANIEL1
  • MEMBER
Well I changed it but with a second hand maf! I cant believe that 2 out of 2 wouldnt work! For the ohms should I look for any movement? Like hi and lows in numbers? Thanks
Was this
answer
helpful?
Yes
No
Tuesday, January 27th, 2015 AT 2:12 PM

Please login or register to post a reply.

Sponsored links