My brakes recently gave out on me while driving. I took it home and noticed a big puddle of brake fluid on and around my rear drivers side tire. After taking it apart I found that the boot on the wheel cylinder was torn. After putting everything back together and replacing the wheel cylinder I still do not have proper brake pressure when I start the engine and I am able to put the brake all the way down with ease. I bled the brakes but it was my first time doing it and I am not sure if I just did not do it properly. Could you let me know if this is the main possibility or could it be something else. Thank you,
have the same problem?
Tuesday, December 11th, 2012 AT 9:11 PM