JUST REPLACED SHIFT SELENOIDS AND BUZZ PLATE.

Tiny
SARNDA44
  • 1999 SATURN SL1
  • 18,000 MILES

JUST REPLACED SHIFT SELENOIDS AND BUZZ PLATE NOW NOW I HEAR BUZZING FROM LOWER GEAR SELENOID AND IS JERKING WHEN SHIFTING FROM FIRST TO SECOND GEAR. IT IS AN AUTOMATIC CAN YOU HELP?

Do you
have the same problem?
Yes
No
Sunday, March 31st, 2013 AT 8:26 PM

7 Replies

Tiny
SATURNTECH9
  • EXPERT
  • 30,281 POSTS

Why did you replace the solenoids and buss plate?What were the symptoms/ codes?

Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 8:38 PM
Tiny
SARNDA44
  • MEMBER

Had gear 1 ratio incorrect on code hard shifting

Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 10:53 PM
Tiny
SATURNTECH9
  • EXPERT
  • 30,281 POSTS

So you have replaced all the solenoids with new ones?Have you performed a line pressure test on the transmission yet?Any delay bang into reverse?Any codes now?

Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 11:06 PM
Tiny
SARNDA44
  • MEMBER

No codes. No delay into reverse . Dont know a thing about how to do line pressure test on transmission sorry is it hard to do what tools do I need thanks christy

Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 11:12 PM
Tiny
SARNDA44
  • MEMBER

Ps yes replaced all selenoids

Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 11:12 PM
Tiny
SARNDA44
  • MEMBER

All gears are shifting fine except for 1 first and it is no longer revving high when changing gears

Was this
answer
helpful?
Yes
No
Sunday, March 31st, 2013 AT 11:14 PM
Tiny
SATURNTECH9
  • EXPERT
  • 30,281 POSTS

To do a pressure test you need a transmission pressure tester set. The one I have is nice and is only 50 something. All you do is unscrew the transmission temp sensor and screw the hose in its place.

Was this
answer
helpful?
Yes
No
Monday, April 1st, 2013 AT 12:07 AM

Please login or register to post a reply.

Other Transmission Gear Second Questions