MOON ROOF PANEL ASSEMBLY
Removal & Installation
1. Fully open moon roof glass panel and sun shade. Pull up on rear of air deflector support and disengage from track retainer. Rotate roof deflector support and remove from air deflector. Remove 8 screws attaching roof sliding panel rails.
2. Connect rear of air deflector support to track retainer. Close moon roof glass panel. Remove moon roof motor.
3. Remove 2 roof sliding panel-to-roof panel screws. Cover painted surfaces. Lift moon roof panel assembly out of vehicle. To install reverse removal procedure.
Tighten 2 roof sliding panel-to-roof panel screws, moon roof motor screws andmoon roof sliding panel rail screws to 36-53 INCH lbs. (4-6 N.M).
Not sure of the cost and you should be checking locally as prices varies according to location.
Sunday, October 21st, 2012 AT 8:22 AM