• Tiny
  • niniyogini
  • 1999 Isuzu Amigo
  • 4 CYL
  • 2WD
  • manual
  • 160,820 miles

My Isuzu Amigo hesitates while accelerating. It feels like it's********, as if it's not getting enough of something. I've already replaced the Camshaft position sensor, but it's still hesitating. What else might it be?

Friday, August 12th, 2011 AT 8:27 PM

1 Answer

  • Tiny
  • rasmataz
  • Member and

Could be one of the following below -check and test:

Oxygen sensors.
Catalytic converter.
Fuel injectors dirty/sticking.
Mass airflow sensor/Airflow meter.
Throttle position sensor.
Manifold absolute pressure sensor.
EGR Valve
Fuel pressure regulator leaking or defective fuel pump.
Fuel contamination.
Foul/defective spark plugs.
Open spark plug wires.
Ignition coil/Coil packs defective.
Incorrect ignition timing.
Cap and rotor.

Note:If it doesn't apply disregard.

Was this
Friday, August 12th, 2011 AT 8:42 PM

Please login or register to post a reply.

Similar Questions