SPONSORED LINKS

Where are other sensors related to the speed sensor @ transmission?

Tiny
JOVON123
  • MEMBER
  • 1999 INFINITI Q45
  • 250,000 MILES
When I bought car 3 codes were on it knock sensors and speed sensor i
changed knock sensors and speed sensor @ thans. But the speed sensor code comes back, forgot to mention. The speed odometer is at 10 on standstill
and the rpm at 10 also the code is p0500a is this at wheel if so how will I determine witch one
SPONSORED LINKS
Sunday, May 20th, 2012 AT 7:10 PM

7 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
You need a scan tool to verify a signal from the trans is reaching the pcm. If it is, you have a failed dash cluster. If not then the reason needs to be determined.

A shop has the actual scan tool you need. Get some help with this

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 7:14 PM
Tiny
JOVON123
  • MEMBER
  • 4 POSTS
What if all other gauges work
Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 7:32 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Does not mean anything. Each works independent of each other.

Roy
Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 7:34 PM
Tiny
JOVON123
  • MEMBER
  • 4 POSTS
Thanks sir just one more thing so you saying that if cluster is bad I can get a p0500 code with check el on?
Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 7:40 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Yes, you can but it needs to be verified with a scan tool, not a guess. It is expensive if it is the cluster

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 8:30 PM
Tiny
JOVON123
  • MEMBER
  • 4 POSTS
Now also the front wheel radels at times of bumps somone said it could be hub bearrings and I could get this as a set with sensor on it could this be true
Was this
answer
helpful?
Yes
No
Sunday, May 20th, 2012 AT 8:50 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Has nothing to do with the speedometer, sorry, that is a separate issue

Roy
Was this
answer
helpful?
Yes
No
Monday, May 21st, 2012 AT 12:01 AM

Please login or register to post a reply.

Related Transmission Input Shaft Sensor Location Content

Sponsored links