I am getting 4 error codes P0310

Tiny
SPINO
  • MEMBER
  • 1999 HYUNDAI ELANTRA
  • 180 MILES
I am getting 4 error codes
P0310
P1700
P0710
P1B00
I found somewhere on the net, another person had same errors, they replaced the water temp sensor, I replaced it and tried to reset the codes, my reader tells me there was an errror resetting the codes
I just want to confirm the above codes mean that the water temp sensor( the sensor with only 1 lead coming off of it) there is the other sensor with 2 leads(which is behind this one)
did I replace the right sensor?
do the above codes mean that this sensor is at fault, I also thought maybe there is a problem with the harness wire which connects to the temp sensor
any ideas
Do you
have the same problem?
Yes
No
Tuesday, November 13th, 2012 AT 2:26 PM

3 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
The one wire is the sending unit for the temperature gauge and would not trigger any codes. The ECT is the 2 wire sensor.

None of the codes are found in our database. Is the vehicle model correct?
Was this
answer
helpful?
Yes
No
+2
Tuesday, November 13th, 2012 AT 3:45 PM
Tiny
JESSE FILSON
  • MEMBER
  • 4 POSTS
I am having the same exact problem with a 2000 Hyundai Tiburon with no luck. I replaced the water temperature sensor also and nothing happened.

Was there any update on how you got the cat fixed?
Was this
answer
helpful?
Yes
No
Sunday, December 24th, 2017 AT 11:09 AM
Tiny
STEVE W.
  • MECHANIC
  • 12,869 POSTS
Jesse, Would it be possible to ask this as a new question with full vehicle info (engine, trans and such) and what codes you have? That will put it on the main board and more people will see it.
Thanks.
Was this
answer
helpful?
Yes
No
+1
Sunday, December 24th, 2017 AT 11:08 PM

Please login or register to post a reply.

Sponsored links