SPONSORED LINKS

The mode buttons don't work that control what.

Tiny
ANDE1139
  • MEMBER
  • 1999 HONDA ACCORD
  • 165,000 MILES
The mode buttons don't work that control what vents operate. The fan and temperature knobs work fine.
Saturday, January 26th, 2013 AT 12:03 PM

3 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Try the following.

HOW TO RETRIEVE A DTC

The heater control panel has a self-diagnosis function.

Running the Self-diagnosis Function

1. Turn the ignition switch ON (II).

2. Turn the fan switch OFF, and the recirculation control switch to Recirculate (recirculation indicator comes on).

3. Press and hold the recirculation control switch to Fresh (recirculation indicator goes off). Continue to hold the switch until the recirculation indicator comes on for 2 seconds, then it will blink the Diagnostic Trouble Code (DTC) to indicate a
faulty component.

Resetting the Self-diagnosis Function

Turn the ignition switch OFF to cancel the self-diagnosis function. After completing repair work, run the self-diagnosis function again to make sure that there are no other malfunctions.
Images (Click to make bigger)
Thumb
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 26th, 2013 AT 1:44 PM
Tiny
RUSSELL SANTANGELO
  • MEMBER
  • 1 POST
# 2 is not written very clearly. #3- where does the DTC code blink? This troubleshooting guide is not written clearly at all.
Was this
answer
helpful?
Yes
No
Wednesday, October 24th, 2018 AT 5:53 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,895 POSTS
What is it you don't understand so I can help?
Was this
answer
helpful?
Yes
No
Friday, October 26th, 2018 AT 12:36 PM

Please login or register to post a reply.

Related Vent No Air Content

VIEW MORE

Sponsored links