1999 Ford Ranger Rockwood

1999 FORD RANGER
Avatar
JTPOWERS
My ranger is a 3.0L fuel flex automatic and I just up new heads on it and now the problem is it wont go pass 30mph with the pedal to the floor.with a push from another vehicle itwill but will lose speed. And going up a hill Iit wont pull its own load. It drop spped to 5mph and even shifting down to first from drive doesn't work. Can someone help me?
Sep 18, 2013 at 5:17 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
scan for codes and check fuel pressure with a gauge first.
Sep 19, 2013 at 8:42 AM
Avatar
JTPOWERS
  • MEMBER
  • 2 POSTS
Its got fuel pressure
Sep 19, 2013 at 10:18 AM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
if it doesn't have 55-65 psi with key on engine off it's not enough
Sep 19, 2013 at 12:05 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.