Heater hose

Tiny
PAOLO SCIORTINO
  • MEMBER
  • 1999 FORD RANGER
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 140,000 MILES
I have a 1999 ford ranger with a 3/4 inch heater hose that unglued from pvc tee fitting it fit inside the tee what kind of glue do I use?
Do you
have the same problem?
Yes
No
Monday, January 31st, 2011 AT 5:00 PM

2 Replies

Tiny
IMPALASS
  • EXPERT
Hello
You can t glue this. You need to replace it. The cooling system is under pressure and it also gets extremely hot. This can come apart when you are driving and strand you.
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 11:38 PM
Tiny
IMPALASS
  • EXPERT
Hello

Also, it looks like you may have some recalls on your vehicle. The dealer may fix these for free. Please contact the dealer service department, give them the VIN number of your car and have them check on these to see if they apply to you.

99B15
07/01/1999
Campaign - Water Pump Replacement

98B34
02/01/1999
Campaign - Windshields Not Marked With AS1 Standard

05S28S15
04/10/2008
Recall - Cruise Control Deactivation Switch Inspection

NHTSA07V336000
08/02/2007
Recall 07V336000: Cruise Control Fire Hazard

01B77
10/01/2001
Recall - Firestone Tire Recall Supplement

FIRESTONE
09/01/2000
Recall - Firestone Tire Recall

00B40
04/01/2000
Recall - Multifunction Switch Replacement

NHTSA99V204000
07/20/1999
Recall 99V204000: A/T Park Mechanism May Not Engage

NHTSA99V062001
03/30/1999
Recall 99V062001: Cruise Control Cables, Binding

99S09
03/01/1999
Recall - Speed Control Cable Replacement

NHTSA98V201000
08/25/1998
Recall 98V201000: Pulse Damper O-ring Seal

98S24
08/01/1998
Recall - Fuel Injector Damper O-Ring Leaks
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2011 AT 11:50 PM

Please login or register to post a reply.

Recommended Guides