Removing rear axle and seal

Tiny
JMATARAZZO
  • MEMBER
  • 1999 FORD F-150
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 206,000 MILES
Hi, I'm attempting to replace the bearings and axle seal on the rear side. I've removed the cover for the differentials, drained the oil out, turned the diff til I found the bolt that holds the gear pin, removed the gear pin and some gears then I removed the "C" clip from the axle. The gears on the axle are loose, and at this point, I believe the axle should slide right out, but for some reason it won't budge, it feels like some thing else is holding it in, any ideas?
Wednesday, August 10th, 2011 AT 4:56 PM

1 Reply

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Hello,

Here is a video that shows the step of the job being done on a similar truck with the same differential.

https://youtu.be/zarxKsspr3s

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
+2
Monday, May 17th, 2021 AT 1:18 PM

Please login or register to post a reply.

Sponsored links