1999 dodge dakota power window regulator replacement
Saturday, January 15th, 2011 AT 8:33 PM
Remove door trim panel.
Remove water dam as necessary to access window regulator.
Remove glass from door.
Fig.34 Power Regulator
Disengage power window motor wire connector from door harness, if equipped.
Fig. 39 Power Regulator Bolts
Loosen bolts in slotted holes attaching regulator to door inner panel.
Remove bolts attaching window regulator to inner door panel.
Extract window regulator through access hole in inner door panel.
Separate window regulator from door panel