Do I need to have the ECU reflashed/reprogrammed

Tiny
LEANNJEFF
  • MEMBER
  • 1999 DODGE DAKOTA
  • 300 MILES
Recently replaced Alternator, battery, and ECU. Now I can not get the truck to start. I have checked the coil and the spark plugs. I am getting spark at both places. The truck acts as though I am not getting fuel. Do I need to have the ecu reprogrammed.
Do you
have the same problem?
Yes
No
Sunday, July 1st, 2012 AT 8:13 PM

8 Replies

Tiny
LEANNJEFF
  • MEMBER
There are 300k mile on my truck
Was this
answer
helpful?
Yes
No
Sunday, July 1st, 2012 AT 8:14 PM
Tiny
SATURNTECH9
  • EXPERT
Is this a new or used ecm you out in?
Was this
answer
helpful?
Yes
No
Sunday, July 1st, 2012 AT 8:18 PM
Tiny
LEANNJEFF
  • MEMBER
It is a used Ecm.
Was this
answer
helpful?
Yes
No
Monday, July 2nd, 2012 AT 2:15 AM
Tiny
SATURNTECH9
  • EXPERT
Is it from the same year make model engine size part number etc?
Was this
answer
helpful?
Yes
No
Monday, July 2nd, 2012 AT 2:19 AM
Tiny
LEANNJEFF
  • MEMBER
The part number match from the ECM I removed to the ECM that I re-installed.
Was this
answer
helpful?
Yes
No
Monday, July 2nd, 2012 AT 2:42 AM
Tiny
SATURNTECH9
  • EXPERT
Is there a security light the dash?
Was this
answer
helpful?
Yes
No
Monday, July 2nd, 2012 AT 4:00 AM
Tiny
LEANNJEFF
  • MEMBER
I think so. If there is would that be a reason for the truck not starting?
Was this
answer
helpful?
Yes
No
Wednesday, July 4th, 2012 AT 2:13 AM
Tiny
SATURNTECH9
  • EXPERT
Sure if the security lights on or flash the anti theft is on.
Was this
answer
helpful?
Yes
No
Wednesday, July 4th, 2012 AT 2:49 AM

Please login or register to post a reply.

Recommended Guides