SPONSORED LINKS

Front Passenger side engine mount bracket removal.

Tiny
MGARDNER
  • MEMBER
  • 1999 CHEVROLET VENTURE
  • 19,800 MILES
How do you remove the front passenger side Engine mount torque strut bracket? I only see two bolts holding it but it still will not come off. I know the front corner head bolt is extended and this bracket slides on to that extended stud. Are their any more bolts holding this on. I'm changing the head gaskets. Any help will be appreicated.

Thanks,
Mark
SPONSORED LINKS
Saturday, December 3rd, 2011 AT 9:00 PM

1 Reply

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,973 POSTS
There is a third bolt down low. Here is some diagrams (below) that show the mount and all of the mounting bolts, the size is 15mm.

Remove the engine mount strut from the engine mount strut bracket at the upper radiator support. Remove the engine mount strut bracket bolts from the engine mount strut bracket. Remove the engine mount strut bracket from the upper radiator support.

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken
Images (Click to make bigger)
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+5
Thursday, August 31st, 2017 AT 2:14 PM

Please login or register to post a reply.

Related Mount Replace/Remove Content

Engine Mount Replacement
GUIDE
Engine Mount Replacement
Engine mounts are made of durable rubber which cushions the engine vibration from the vehicle frame. These mounts hold the engine in the car and are bolted to the engine...
VIEW MORE

Sponsored links