You have to remove the little C clip on the window crank if you push the door panel in you can take a pick and remove the clip. Then take all the door panel screws out then remove the release handle and pop the release and door lock rods loose then remove the release handle. Then slide the door panel up and out. Then you will have to roll the window down to where you can get to the plastic clips that hold the window to the regulator. Then push the plastic release tabs in and slide the regulator off the window. The slide the window up and out. The remove the 10mm bolt on the left side that attaches the regulator to the door. Then loosen the four T-40 torx bolts that hold the regulator in place then remove the regulator.